Restore support to a common handle stress point.

The MP Maresh Products Handle Brace Repair Kit is designed to reinforce the connection between the middle handle tube and bag connector area on compatible upright vacuum cleaners. This area is a frequent stress point that can loosen, crack, or break over time from repeated use. This steel support brace helps strengthen that connection and improve handle stability.

Compatible replacement for part numbers: 75435-01 and 75432-01

Associated handle tube part: 75190-03

This repair kit is intended for many compatible Oreck U2000, XL2000, and related upright vacuum models. Please compare your existing part number, model number, and application before ordering.

Important Disclaimer: This product is an aftermarket replacement part manufactured by MP Maresh Products. It is not an OEM product. Any brand names, trademarks, or model designations are used only for the purpose of showing compatibility.

The post MP Maresh Products Handle Brace Repair Kit Compatible with Oreck U2000 Series Vacuums, Replaces 75432-01, 75435-01, Steel Handle Support first appeared on The Vac Shop.

• VACUUM POWER HARNESS REPLACEMENT –Compatible with select commercial upright vacuum models using a handle-end configuration. Direct replacement for part numbers 430000990 and 75957-01-441.
• 120V POWER CORD – Rated 120V AC. Durable molded plug with integrated strain relief for secure connection and long service life.
• 16 AWG 3-CONDUCTOR LEAD – Color-coded Hot (Black), Neutral (White), and Ground (Green) with bare copper wire ends for internal wiring installation.
• APPROX. 16 INCH OVERALL LENGTH – Includes approximately 4 inches of stripped wire leads to allow flexible installation inside upright vacuum handles.
• COMPATIBLE MODELS: U2000EB, U2000R XL, U2000R-1, U2000RB, U2000RB-1, and U2000RB2L-1 commercial upright vacuums with 3-wire configuration.
• EASY INSTALLATION: Hassle-free setup, so you can get your vacuum back to peak performance in no time.
• COMMERCIAL-GRADE REPLACEMENT PART: Designed for repair and maintenance applications. Ideal for restoring power connection in professional upright vacuums.

Restore proper electrical pigtail connection to your upright vacuum with this MP Maresh Products replacement harness cord. Designed for select Oreck U2000 series commercial upright vacuums, this part replaces 430000990 and is built for dependable performance in commercial use.

Key Features

• Compatible with select Oreck U2000 models (see compatibility list below)
• Replaces Part # 430000990 (aftermarket replacement)
• 120V 3-conductor configuration for proper grounded connection
• Commercial-grade durability for frequent use environments
• Direct-fit replacement—verify model before ordering

Compatible Models (from parts catalog)

• U2000EB Restaurateur
• U2000R XL Commercial
• U2000R-1 XL Commercial
• U2000RB XL Commercial
• U2000RB-1 XL Commercial
• U2000RB2L-1 XL Commercial

Product Identifiers
SKU: MP-4300990
UPC: 850002491616

Important Notice
This is a non-OEM aftermarket replacement part manufactured in China. It is not manufactured by, affiliated with, or endorsed by any other Brand names. Brand names and model references are used only to indicate compatibility.

The post Replacement Oreck U2000 Series 16″ Handle Wiring Harness Pigtail Cord first appeared on The Vac Shop.

Product information

The post Replacement For Oreck U2000 Series Upright Vacuum Hall Effect Board # 430001343, 75927-01 W/Harness first appeared on The Vac Shop.